Skip to content


6 thoughts on “ Intermodulation Distorsion Test, 100 Hz, 7Khz, Ratio 4:1, 7 Cm/Sec. - No Artist - Stereo Test Disc

  1. While each M is very compact— inches wide, inches deep and a inches tall—the amps should not be taken, well, lightly. Their physical size-to-sonic-punch ratio makes them a bit like the Sugar Ray Leonard of the amp world. The Ms deliver a hefty watts into 8 ohms, and watts into 4 .
  2. Capture ratio is 3 dB. Signal-to-noise ratio in stereo is 60 dB. The amplifier section is rated at 4 watts per channel into 4 -ohm loads from to 10, Hz with no more than per cent total harmonic distortion. Maximum output power is 6 watts per channel. System EQ is +6 dB at Hz and +3 dB at 10, Hz. Price: $ Circle on.
  3. Sample rate is the number of samples of audio carried per second, measured in Hz or kHz (one kHz being 1 Hz). For example, 44 samples per second can be expressed as either 44 Hz, or kHz. Bandwidth is the difference between the highest and lowest frequencies carried in .
  4. Krell MD10 with remote LASER Single Beam with glass lens OUTPUT Digital only in industry standard SP_DIF format. 1 FIBRE OPTIC via standard intertace 1 COAXIAL via RCA connector 1.
  5. range from percent at 15 cm/s to percent at 30 cm/s. These figures are close to the lowest we have measured from a phono cartridge and may reflect the intrinsic distor-tion of the test record. The 1, -Hz square waves of the CBS STR test record showed only a single overshoot and a mod-erate amount of low-level ringing, a.
  6. In signal processing, sampling is the reduction of a continuous-time signal to a discrete-time signal.A common example is the conversion of a sound wave (a continuous signal) to a sequence of samples (a discrete-time signal).. A sample is a value or set of values at a point in time and/or space. A sampler is a subsystem or operation that extracts samples from a continuous signal.

Leave a Comment